Vlc — 1600 Datasheet

The VLC 1600 series represents a class of linear position sensors designed for high-precision feedback in demanding environments. Unlike traditional potentiometers that rely on a physical wiper contact, the VLC 1600 utilizes a non-contacting inductive or Hall-effect technology (depending on the specific sub-variant). This design choice significantly extends the operational lifespan of the sensor, making it suitable for applications where mechanical wear is a critical failure mode.

The hardware measures 4.9 inches (125mm) H x 5.0 inches (127mm) W x 1.4 inches (36mm) D. vlc 1600 datasheet

: All programming and setup data are stored in non-volatile flash memory, ensuring operation is stable even after power losses. Environmental & Installation Operating Temp : 0 to 158°F (-17 to 70°C). Humidity : 5 to 95% RH, non-condensing. The VLC 1600 series represents a class of

For those in the manufacturing and heavy engineering sectors, "VLC 1600" refers to a specific produced by the Czech manufacturer FERMAT Machinery. The "VLC 1600 ATC+C" is a large, single-column vertical lathe designed for the demanding machining of heavy and large-volume workpieces. The table below compiles key specifications from available machine listings. The hardware measures 4

The datasheet became less a manual and more a conversation. Notes were scribbled in margins: "Try 2.7 V here," "Buffer needed for long traces," "Watch rise time at 85°C." The team iterated with care. Prototypes came back with improved traces, corrected decoupling, cleaner ground planes. Each change was annotated and fed back into a shared living document — a human datasheet that amplified the original.

| Parameter | Specification | |---|---| | | Visible Light Communication (VLC) / Li-Fi | | Data Rate | Up to 1600 Mbps (1.6 Gbps) | | Wavelength Range | 380 nm – 780 nm (visible spectrum) | | Modulation | OFDM, OOK, VPPM | | Transmitter Type | High-power LED array or laser diode | | Receiver Type | PIN photodiode or avalanche photodiode (APD) | | Range (Typical) | 1 – 10 meters (line-of-sight) | | Bit Error Rate (BER) | < 10⁻⁹ (at 1 meter) | | Latency | < 1 ms | | Applications | Underwater comms, hospitals, aircraft cabins, secure RF-free zones | | Standards | IEEE 802.15.7 (VLC) |

: Collecting pulse outputs or current readings (4–20 mA) across multiple breaker panels.