: When configuring the software, ensure the connection type is set to USB rather than a specific COM port (e.g., COM1 or COM3), as the direct driver does not assign a port number.
Go to .
Driver version 02.10.00 contains integrity checks. If you are using a counterfeit or "clone" VCDS cable, installing official Ross-Tech drivers will often wipe or rewrite the EEPROM firmware inside the aftermarket cable. This permanently bricks the unauthorized hardware. Only install this driver version if you own a genuine Ross-Tech interface. To help troubleshoot further, let me know: vcds usb driver version 02.10.00
: This driver package often includes the ability to enable a Virtual COM Port , which allows third-party diagnostic software that only recognizes serial ports to function with Ross-Tech hardware.
Once your driver is functioning, adhere to these guidelines to ensure safe operation: : When configuring the software, ensure the connection
VCDS USB driver version (also formatted as 2.10.00) is a legacy direct USB driver for Ross-Tech diagnostic interfaces, originally released around May 12, 2014 . It is frequently cited in current troubleshooting reports for both genuine and "clone" HEX-V2 or HEX-USB interfaces where the interface is not recognized by the software despite the driver loading successfully. Technical Summary Driver Version: 02.10.00 (RT-USB64.SYS).
A common complaint with VCDS is that after a Windows update, the software suddenly says “Interface not found.” Rolling back to a known-good driver like frequently resolves this. The reason? Windows Update often overwrites your custom FTDI driver with a generic Microsoft-signed version that lacks the specific latency settings VCDS requires. If you are using a counterfeit or "clone"
While VCDS itself does not require a COM port, this driver version often appears in discussions regarding Ross-Tech Virtual COM Port drivers , which allow legacy cables to work with third-party software that specifically requires a serial interface.
The classic dual-K plus CAN interface. KII-USB: Designed for older K-line only vehicles. Micro-CAN: Dedicated to specific golf-platform cars.
is a legacy driver package released by Ross-Tech on May 12, 2014 , designed to facilitate communication between genuine Ross-Tech USB interfaces and Windows-based PCs . While modern VCDS interfaces like the HEX-V2 operate as HID devices and do not require specific driver installations, this version remains a critical component for users of older "Legacy" interfaces who need stable connectivity on newer operating systems. Key Specifications of Version 02.10.00
: Always download the latest version of VCDS from the Ross-Tech Download Page. The installer bundles the necessary drivers.
