Spreadtrum Imei Tool V4.1 ((hot)) <No Sign-up>

Click on the Set or Mode Select button. If the phone is on, select Normal Mode ; if it is off or in a specific diagnostic state, use Calibration Mode .

Avoid unless you are an experienced repair technician working on your own legacy device with documented IMEI loss — and you are fully aware of the legal and hardware risks. For most users, the tool is more likely to cause permanent damage or install malware than to fix a phone. If you simply lost your IMEI, try reflashing the stock firmware first.

Enter the 15-digit stock IMEI number(s) found on the device's original box or under the battery.

: Install the necessary Spreadtrum USB drivers on your computer to ensure the device is recognized in the Device Manager . Spreadtrum Imei Tool V4.1

It works using Normal Mode or Flash Mode to talk to your phone through a USB cord.

Download the verified Spreadtrum IMEI Tool V4.1 archive. Extract the contents using WinRAR or 7-Zip to a dedicated folder. Right-click on ChannelServer.exe or IMEIRebuild.exe and select . Step 2: Configure the Target Parameters

Click the or Write button on the software interface. The tool will enter a standby state, waiting for the device. Power off your phone completely. Click on the Set or Mode Select button

: Changing an IMEI to a number other than the one originally assigned to the device is illegal in many countries. This tool should only be used for repairing lost or corrupted IMEIs.

Changing or cloning IMEI numbers is illegal in many countries. This tool should only be used for legitimate repair purposes—specifically, restoring the device's original IMEI after a system failure.

Open the folder and run SPD_IMEI_Tool.exe as an administrator. 2. Configure the Tool Upon opening, you will see fields for and IMEI 2 . For most users, the tool is more likely

The tool should detect the device, assign a virtual COM port, and begin writing the data.

The tool can also write and correct the phone's unique Bluetooth and Wi-Fi MAC addresses. Users can enter them manually, or the tool can generate them automatically based on a time or address range, ensuring validity and preventing conflicts.

: Launch the WriteIMEI.exe application. In the tool settings, select the correct COM port identified in your Device Manager.