Managing Your Network : smi mptool sm32x sm34x smi mass production tool : smi mptool sm32x sm34x smi mass production tool
  
Defining Uplink Types
You define uplink types in the Sites & Networks page.
An uplink type is a name for similar functioning uplinks. On the SCC, uplink types can be used across multiple sites and path selection rules can be created using these names. The name must be unique at a site (but it can be same across different sites) so that the system can detect which path selection rule uses which uplinks. Because path selection rules are global on the SCC, you are restricted to 8 uplink types.
Uplink types are the building blocks for path selection. You select the path preference order using the uplink types created, and it is used in various sites. Riverbed recommends that you reuse the same uplink types at different sites in order to label uplinks based on the preference for path selection. For example, you can label uplink types as primary, secondary, and tertiary based on the path selection preference. The uplink type can be based on the type of interface or network resource, such as Verizon or global resource of uplink abstraction that is tied to a network.
Note: On the SteelHead, this field is called the Uplink Name, on the SCC it is the Uplink Type. Riverbed recommends using the same name for an uplink in all sites connecting to the same network.
To define an uplink type
1. Choose Manage > Topology: Sites & Networks to display the Sites & Networks page.
2. Under Uplink Types, click the > to expand the page.
3. Click the + to display the New Uplink Type dialog box.
Figure: New Uplink Typessmi mptool sm32x sm34x smi mass production tool
4. Complete the configuration as described in this table.

Smi Mptool Sm32x Sm34x Smi Mass Production Tool Jun 2026

The SMI MP Tool is versatile, serving a wide range of users:

Click or OK to return to the primary visual matrix interface. 5. Execute the Mass Production Process

Silicon Motion tightened security on these controllers. Using the wrong version of the SMI MPTool can permanently lock the chip, requiring a hardware programmer to fix. You must match the "ISP" (In-System Programming) code to the exact NAND flash ID. smi mptool sm32x sm34x smi mass production tool

Insert your corrupted USB drive into a on your computer (USB 2.0 provides better stability for flashing tools). Open ChipGenius and locate your USB drive in the list.

Depending on your precise recovery goal, you must choose between different testing configurations inside the settings menu: Operational Function Primary Use Case Risk Level The SMI MP Tool is versatile, serving a

The is arguably the most comprehensive public library, containing dozens of versions such as SMI MPTool V2.5.27 v8 M1004 for specific chips. Similarly, the TRANSCEND-SM32X-PV1.3.08-BY-USBDEV-U1207 build packs 31 different versions of the SMI MPTool for microcontrollers from the SM32X line into one convenient download.

The SMI MPTool (Mass Production Tool) is a specialized utility used by manufacturers and technicians to format, partition, and flash firmware onto USB flash drives powered by Silicon Motion controllers. When a USB drive suffers from severe file system corruption, displays "device not recognized," or locks up in a permanent write-protected state, standard Windows formatting tools fail. The SMI MPTool bypasses the operating system layer to communicate directly with the SM32x and SM34x microcontrollers, allowing for a complete low-level restoration. Supported Controller Architectures: SM32x vs. SM34x Using the wrong version of the SMI MPTool

Load the default configuration file (usually named default.ini ). Phase 3: Tweaking Settings (Optional)

The series (SM3280, SM3281, SM3350, SM3355) represents the modern generation.

Look for the (which must state "Silicon Motion" or "SMI") and the Controller Part Number (e.g., SM3268AB or SM3257ENLT ). 2. Download the Corresponding MPTool Version

5. Click Save to save your settings.