Opcom 167 Firmware Work -

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

: Compatible with Windows XP, 7, 8, 10, and 11. Driver Installation : Connect the interface to your PC via USB.

This article explores whether OP-COM firmware 1.67 actually works, how it compares to other versions, and what you need to know before using it on your vehicle. The Core Question: Does OP-COM 1.67 Work? opcom 167 firmware work

Remove the Opcom 167 PCB. Locate the (or the 2585 variant). Unlike the older 160 version, the 167 does not have a convenient ICSP header. I had to solder six jumper wires to the following pins:

Vehicle model and year ? (e.g., Astra J 2013) This public link is valid for 7 days

Open Device Manager → Ports (COM & LPT). A genuine Opcom 167 shows as "FTDI FT232R USB UART." Check the PCB: look for a large PIC18F2480 or PIC18F2580 chip. If you see a PIC18F25K80, you have a newer variant.

October 26, 2023 Reading Time: 4 minutes Can’t copy the link right now

: Actuate specific components manually to verify physical functionality (such as triggering cooling fans, fuel pumps, or dashboard gauges).

Provides real-time parameter tracking for sensors across all supported control units. Why Firmware 1.67 Over 1.99?

The exact steps can vary depending on the software used, but a typical process using looks like this:

: Monitor sensor outputs in real-time (e.g., fuel trim, coolant temperature, O2 sensor voltages).