Mikrotik L2tp Server Setup Full ~repack~ Jun 2026

Select your WAN interface (e.g., ether1 or pppoe-out1 ). Switch to the Action tab: Action: accept

Replace 192.168.1.0/24 with your actual LAN subnet.

VPN clients need IP addresses assigned to them when they connect. Creating a dedicated IP pool ensures these addresses do not conflict with your existing local area network (LAN) devices. Open Winbox and navigate to > Pool . Click the + (Add) button. Set the Name to l2tp-pool . mikrotik l2tp server setup full

Layer 2 Tunneling Protocol (L2TP) combined with IPsec (IP Security) remains a highly secure, reliable, and universally compatible VPN solution. It allows remote workers and branch offices to securely connect to a central network. MikroTik RouterOS makes deploying an L2TP/IPsec server straightforward.

192.168.89.1 (The router's IP within the VPN subnet) Remote Address: l2tp-vpn-pool In the Protocols tab: Use Encryption: yes or required In the Limits tab (Optional): Select your WAN interface (e

The profile defines the bridge between the VPN tunnel and your local network. Go to and click + . Name: l2tp-profile . Local Address: Your router’s LAN IP (e.g., 192.168.88.1 ). Remote Address: Select the vpn-pool created in Step 1. DNS Server: Add your preferred DNS (e.g., 8.8.8.8 ). Step 3: Enable the L2TP Server with IPsec

Navigate to from the main menu and select the Profiles tab. Click the + button to create a new profile. In the General tab: Name : l2tp-profile Creating a dedicated IP pool ensures these addresses

Define the range of IP addresses that will be assigned to remote VPN clients. : IP > Pool Command :

Setting up an L2TP (Layer 2 Tunneling Protocol) server on MikroTik remains one of the most reliable ways to provide secure remote access to a local network. When combined with IPsec, it offers a robust balance of security and compatibility across Windows, macOS, Android, and iOS.

This ties the authentication methods together.

Change DNS Server if necessary (e.g., 8.8.8.8 or your internal DNS). Click and OK . Part 3: Enable L2TP Server Now, we activate the L2TP service on the router. Go to PPP > Interface . Click L2TP Server . Enabled : Check this box. Default Profile : Select l2tp-profile . Authentication : Check mschap2 (recommended).