Legacy drivers distributed with older versions of Mastercam X5 are frequently incompatible with newer operating systems like Windows 10 or 11.
After the reboot, plug the HASP key back in. 3. Configuring HASP/NetHASP via NHaspX.exe
The driver for the NetHASP / HASP key (made by SafeNet/Aladdin) may be missing or corrupted. mastercam x5 no sim found
The "No SIM Found" error message is the software's way of saying the required license key cannot be located. This is a specific licensing error, distinct from other potential issues. Here's a breakdown of the most common reasons for its appearance:
They can confirm if the key is dead or needs replacement (though X5 is very old – they may push for upgrade). Legacy drivers distributed with older versions of Mastercam
Check the column. If it does not say "Running", right-click the service and select Start . Right-click the service again and select Properties . Set the Startup type to Automatic . Click Apply and then OK . 4. Run Mastercam SIM Type Utility
: Try plugging the USB key into a different port, preferably one directly on the motherboard (the back of the PC) rather than a USB hub. Configuring HASP/NetHASP via NHaspX
If your organization uses a NetHASP license and you receive this error, the problem usually stems from network communication breakdowns rather than your physical workstation.
Extract the contents and run HASPUserSetup.exe as an administrator.
If you still cannot solve the issue, Mastercam provides a utility to diagnose licensing issues. Download the . Run McamInspect.exe Mastercam X5 Go to product viewer dialog for this item. Click "Analyze" to check for licensing problems.
Locate NHaspX.exe and run it as an administrator (Right-click > Run as Administrator). In the configuration dialog, set to HASP . Ensure Active is selected. Click OK and restart Mastercam. 4. Solving Compatibility Issues on Modern Windows Mastercam X5 Go to product viewer dialog for this item.