, the boiler will stop. Open the (water tap underneath) to increase pressure to Overheating: The boiler has reached too high a temperature. Routine Maintenance
Use the Central Heating temperature dial (usually denoted by a radiator icon).
Failed circulation pump; completely blocked main heat exchanger.
Once operational, the boiler becomes the quiet heart of the home. The user interacts with it via the front panel: The Display
Proper daily use and regular maintenance are key to the longevity and efficiency of your boiler.
The boiler responds to both room thermostat calls for heating and hot water tap usage.
. When there is no active hot water demand, the screen displays current central heating output water temperature. 3. Adjusting Domestic Hot Water (DHW)
Test the internal bladder pre-charge pressure using a standard tire pressure gauge while the boiler is fully depressurized. Recharge to approximately 1.0 bar using a manual air pump if needed.
Provides real-time feedback on temperature settings and system status. Installation & Maintenance Requirements
Correct plumbing for inlet/outlet pipes.
+----------------------------------------------------+ | LCD DISPLAY | | [Radiator Symbol] [Tap Symbol] | +----------------------------------------------------+ ( O ) ( O ) [RESET] Heating Temp Hot Water Temp Reset/Power 1. Powering the System On/Off
Water temperature exceeded 105°C; air in the system; pump blockage.
Release the button and return the knob to your desired operating mode.
.svg)
Delivered in partnership with the University of Wolverhampton
Next Intake: May
Duration: 4 Years (Including Foundation Year)
Offers a blend of innovative and traditional education leading to outstanding professional opportunities for students.
, the boiler will stop. Open the (water tap underneath) to increase pressure to Overheating: The boiler has reached too high a temperature. Routine Maintenance
Use the Central Heating temperature dial (usually denoted by a radiator icon).
Failed circulation pump; completely blocked main heat exchanger.
Once operational, the boiler becomes the quiet heart of the home. The user interacts with it via the front panel: The Display
Proper daily use and regular maintenance are key to the longevity and efficiency of your boiler.
The boiler responds to both room thermostat calls for heating and hot water tap usage.
. When there is no active hot water demand, the screen displays current central heating output water temperature. 3. Adjusting Domestic Hot Water (DHW)
Test the internal bladder pre-charge pressure using a standard tire pressure gauge while the boiler is fully depressurized. Recharge to approximately 1.0 bar using a manual air pump if needed.
Provides real-time feedback on temperature settings and system status. Installation & Maintenance Requirements
Correct plumbing for inlet/outlet pipes.
+----------------------------------------------------+ | LCD DISPLAY | | [Radiator Symbol] [Tap Symbol] | +----------------------------------------------------+ ( O ) ( O ) [RESET] Heating Temp Hot Water Temp Reset/Power 1. Powering the System On/Off
Water temperature exceeded 105°C; air in the system; pump blockage.
Release the button and return the knob to your desired operating mode.
