Kes Geyser Load Control Timer Manual New →

The KES Geyser Load Control Timer is an energy-saving digital switch designed to optimize water heater electricity consumption. By scheduling specific heating cycles, users can drastically reduce household utility bills while maintaining a reliable hot water supply.

Enters the scheduling menu and cycles through the 16 ON and OFF slots. D+ (Day): Sets or modifies the days of the week.

: If you need hot water immediately and the timer is in an "OFF" cycle, press the kes geyser load control timer manual new

The unit can be installed on a inside an electrical distribution (DB) panel or surface-mounted, often in a ceiling cavity near the geyser isolator.

When finished, press the button to save and exit back to the home screen. Step 4: Setting to Automatic Mode The KES Geyser Load Control Timer is an

The timer is on, but the geyser is not heating water, forcing you to rely on the override button for hot water. Possible Solutions:

Device mode is set to manual "ON" or "OFF" instead of "AUTO". D+ (Day): Sets or modifies the days of the week

Displays the current day of the week, time (HH:MM:SS), current operation mode (ON, AUTO, OFF), and active program numbers.

Press to switch the unit to ON so your geyser begins heating immediately.

Use a paperclip or pen tip to press the recessed button.

Sets the days of the week (individual days or block day combinations).