amount while it's supposed to be stopped, shut the machine down for safety."
: It stores the absolute position data for each controlled axis. Absolute Encoders : This parameter works in conjunction with Parameter 1815 (specifically the
bits), which tells the system that an absolute pulse coder is being used and whether the reference position has been established. Coordinate Synchronization fanuc parameter 1860 full
Technicians often confuse 1860 with other parameters. Here is a clear comparison:
The control will issue a "100 PARAMETER WRITE ENABLED" alarm; this is normal. Navigate to [PARAMETER] , and press to find the specific axis values. amount while it's supposed to be stopped, shut
Indicates if the reference position (zero point) is established. If it is 0, a 300 APC alarm occurs.
: The alpha/beta servo motors use internal pulse coders kept alive by lithium batteries when the main breaker is flipped off. Here is a clear comparison: The control will
Modifying Parameter 1860 requires cautious preparation to ensure the machine remains stable. Follow this operational checklist to change the absolute zero position: 1. Enable Parameter Write (PWE) PARAMETER MANUAL
An incorrect setting in Parameter 1860 will result in the machine moving an incorrect distance (e.g., commanding 100mm but moving 50mm or 200mm), rendering the machine unable to perform accurate machining or threading.