Select and enter your PIN or use an authorized RFID.
Click on the specific room or Evoko Liso unit that you want to reset.
Navigate to and select Reboot or look for a Reset Settings option. evoko liso factory reset verified
A message will appear on the screen stating: "If you do not want to flash the device, remove the USB... otherwise it will start flash in 30 seconds" .
Once the service menu appears, navigate using the touchscreen to select or Update Firmware via USB . Confirm the action when prompted. Select and enter your PIN or use an authorized RFID
How to Perform an Evoko Liso Factory Reset (Verified Methods)
A factory reset rolls the device back to its factory-installed firmware or the last stable baseline partition. You will likely need to update the firmware immediately after the reset. A message will appear on the screen stating:
Unplug the Power over Ethernet (PoE) cable or the power adapter from the back of the Evoko Liso unit.
The device will automatically detect the firmware on the USB and begin the re-imaging process. 2. How to Verify the Reset ("Verified" Status)
How to Factory Reset an Evoko Liso: Verified Steps and Troubleshooting