Dtape Dt50 User Manual Pdf To Use Work [2021] -

By default, the laser measures from its base (rear reference). If you need to measure from the front edge of the device:

The heart of the DT50 lies in its versatile measurement modes. The manual details each one, but here’s a clear breakdown:

Press the button until a right-angle triangle icon appears. dtape dt50 user manual pdf to use work

Use a white target card; avoid highly reflective or translucent glass surfaces. Ambient light environment is too bright.

Slide off the battery compartment cover on the back of the device. Insert two AAA alkaline batteries, paying strict attention to the polarity symbols (+/-) marked inside the compartment. Snap the cover back into place. 2. Selecting the Measurement Unit By default, the laser measures from its base

Before heading to a job site, ensure your device is prepared. The DT50 typically runs on two AAA batteries. To begin, slide off the battery cover on the back and insert the batteries, noting the correct polarity. Once powered, press the red READ button to turn the device on. You will see a laser dot appear; this is your targeting guide.

Designed with an , the DT50 is dust and splash-proof, making it suitable for active construction sites. The internal memory can store up to 20 groups of data , allowing users to review previous measurements without manual logging. Use a white target card; avoid highly reflective

Press the Read/On button. The screen will illuminate.