Personalize your hotspot network name.
| Specification | Details | | :--- | :--- | | | Smartfren Andromax M2Y | | Network Type | 4G LTE Cat.4 | | Supported Bands | TDD-LTE (2300 MHz) & FDD-LTE (850 MHz) | | Max Speed | Up to 150 Mbps (Download) | | WiFi Standard | 802.11 b/g/n (2.4 GHz) | | Max WiFi Users | Up to 32 Devices | | Battery | Li-ion 2000 mAh (removable) | | Battery Life | Up to 10 hrs (usage) / 350 hrs (standby) | | Processor/Chipset | Qualcomm MDM 9307 | | Storage Expansion | microSD Slot (up to 32 GB) | | Dimensions | ~85 x 55 x 17 mm | | Interface | micro USB (charging), WPS Button, Reset Pinhole | | Admin Interface | Web-based at IP 192.168.1.1 (Default login: admin / admin) | | Management App | MyLink M2Y (available for Android and iOS) |
Choose the installation directory (leaving it as default is highly recommended). Click . Step 3: Authorize Driver Software
Setting up the device for the first time or configuring it after a long period of disuse is a straightforward process. Step 1: Insert the SIM Card and Battery Remove the back cover of the MiFi. Slide your Smartfren 4G SIM card into the designated slot.
Once finished, restart your computer. Your PC should now recognize the MiFi as a network interface via USB. Method 2: Installing Manual Qualcomm Drivers
Locate the unknown device with a yellow exclamation mark (often listed under "Other Devices" or "Ports").
Uninstall any previous Smartfren software from your Control Panel. Restart Windows in "Disable Driver Signature Enforcement" mode (found in Advanced Startup settings) and reinstall the driver. Issue 2: Computer Doesn't Recognize the MiFi via USB Cause: Faulty USB cable or malfunctioning USB port.
This is usually an IP conflict or an APN issue rather than a driver issue. Log into the device's web management page. Open your browser and type 192.168.1.1 into the address bar. Log in (default credentials are usually admin/admin). Check if your Smartfren data package is active and ensure the device is successfully catching an LTE signal. Alternative: Accessing the Device Without a Driver
When you connect the device to a computer via a USB cable to use it as a tethered modem, your operating system (Windows or macOS) utilizes built-in or CDC-ECM drivers to recognize the MiFi as a virtual network card. How to Install the Andromax M2Y USB Driver
Perform a hard factory reset. Locate the small hole labeled RESET on the side or under the back cover of the device. Use a paperclip or a needle to press and hold the button inside the hole for 5 to 10 seconds while the device is powered on. The lights will flash, and the device will reboot with its factory-default Wi-Fi name, Wi-Fi password, and admin credentials (found on a sticker underneath the battery). 6. Optimizing Battery Life and Longevity
The Andromax M2Y remains a reliable piece of hardware for localized internet access and legacy setups. For basic Wi-Fi use, you can skip drivers entirely. However, if you plan to tether it to a computer or update the system, installing the built-in setup software or the Qualcomm USB driver will ensure flawless connectivity. Always keep your admin passwords secure, monitor the physical health of your removable battery, and use the web portal to keep an eye on your data usage.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Double-click the drive and locate the setup.exe or install.exe file. Method 2: Manual Online Download
