Canon — Service Tool V4720 Download Verified _verified_

The same user later tested v4720 on an iP7250 with original firmware—and it worked perfectly. But when the same v4720 tool was used on an MG7150 with updated firmware, it produced (printer not compatible) and again required pulling the power cord to recover. Service mode was lost.

A: V4720 works primarily with printers using the PGI-550/CLI-551 cartridge generation. This includes models like the MG5450S, MG5550, MG5520, MG6450, iP7250, and similar printers from that era. Newer printers (G-series, TS-series) typically require newer service tools like v4905 or v5204.

Release both buttons. The green power light should blink and then stay solid, indicating the printer is successfully in Service Mode. Step-by-Step Guide to Resetting the Waste Ink Counter

The quest for a is legitimate—many printers are perfectly functional except for a simple counter that needs resetting. However, the risks of downloading from unverified sources are real: malware, bricked printers, and wasted time. canon service tool v4720 download verified

It is widely used for G-series models (e.g., G1000, G2000, G3000 series) and various PIXMA models like the MG2400 and MG6650.

Disconnect external hard drives, extra printers, or scanners to prevent the software from sending commands to the wrong hardware target.

While still holding the button, press and hold the Power button. The green power LED will light up. The same user later tested v4720 on an

The Canon Service Tool (sometimes referred to as a "resetter") is a maintenance program that allows users to access a printer's internal EEPROM (electrically erasable programmable read-only memory) to reset usage counters. Its primary purpose is to clear the waste ink counter, which records how much ink has been flushed into the printer's internal waste ink pads. Once this counter reaches its maximum, the printer locks up and displays an error message. The tool does not fix physical hardware issues but resets the software flag that prevents further printing.

Turn off the printer using its power button. It may take a few moments to shut down completely. Unplug the USB cable, plug it back in, and turn the printer on normally. The 5B00 error is now cleared. Troubleshooting Common Service Tool Errors

Your safest options, ranked:

If your Canon printer has stopped working and is flashing an error code like or 1700 , your machine is not permanently broken. These codes indicate that the waste ink absorber pad is officially full. Canon designs printers to lock down at this point to prevent ink from leaking onto your desk.

The function you are trying to execute is not supported by your printer's firmware hardware layout.