Broadlink Manager is a and not officially supported by Broadlink. Official apps are typically more reliable but may not offer the same local integration capabilities.
Open your Broadlink app, select your RM device, and delete it.
A power cycle resets the USB or network stack, forcing the device to re-announce its presence on the bus or network. This makes it "hot" again. broadlink manager writing compatible device not detected hot
Here are some steps you might consider to troubleshoot the issue:
Log into your Wi-Fi router settings. Ensure "AP Isolation," "Client Isolation," or "Guest Network" modes are turned off for your smart home band. Broadlink Manager is a and not officially supported
Whether the device is with the official BroadLink mobile app.
Before attempting any software fixes, unplug the BroadLink device from the wall outlet or disconnect its USB power source. Let the device sit unplugged for at least 15 to 20 minutes. A power cycle resets the USB or network
If you have unlocked the device, managed the heat, and still get the "writing compatible" error:
Newer Broadlink firmware (post-2022) sometimes disables local control by default. If your device was set up only with the Broadlink app and never enabled “Allow LAN Control” (on models that support it), it will ignore local UDP commands.