Manual Fixed — Ats-20 Radio

Identify your device's COM port in your computer's Device Manager.

Short press BAND/VM to toggle between VFO and Memory modes. Then use the encoder to scroll through your saved channels. ats-20 radio manual

Tip: Use 2.0kHz–3.0kHz for clear SSB voice reception, and 4.0kHz–6.0kHz for high-fidelity music broadcasts. Accessing the Secondary Menu (Volume & Mute) Identify your device's COM port in your computer's

“STEP 4: For the numbers station, tune to 4625 kHz at 02:00 UTC. MODE to ‘USB.’ Do not speak to the lady. She is not a lady anymore.” Tip: Use 2

The OLED display draws notable power. Enter the menu ( B1 ) and enable an automatic screen timeout if your firmware version supports it. Firmware Flashing

| Problem | Likely Cause | Solution | |---------|--------------|----------| | Won’t turn on | Dead battery / reversed polarity | Charge 4+ hrs; check 18650 orientation | | No FM reception | Antenna not connected (for SMA version) | Attach stub antenna or wire | | Poor shortwave | No external antenna | Add 15–30 ft wire outdoors | | Display flickers | Low battery or USB noise | Charge battery; use battery power | | Menus stuck | Accidental long press | Short press B or cycle power |