Ap3g3-k9w8-tar.153-3.jpo.tar

AP3802i wont join 5508 controller - Page 2 - Cisco Community

: Often used via TFTP to recover an AP that has lost its operating system or to switch it from Autonomous mode back to Lightweight mode. 4. Installation Requirements Compatible Hardware : Cisco Aironet 2800/3800/4800 series.

This guide covers the file, which is a Cisco Lightweight Access Point firmware bundle. Ap3g3-k9w8-tar.153-3.jpo.tar

w8 : Lightweight/CAPWAP mode (requires a controller to function).

The jpo image applies Japanese Tx power constraints. An AP loaded with this will show RegDomain: J even if it is a -A (Americas) unit. This reduces transmit power on channels 1-11. To revert, you must load a generic K9W8 image via the bootloader (ROMMON). AP3802i wont join 5508 controller - Page 2

Understanding the ap3g3-k9w8-tar.153-3.jpo.tar Firmware for Cisco Aironet Access Points

Ap3g3-k9w8-tar.153-3.jpo.tar Device Family: Cisco Aironet 1600, 2600, and 3600 Series Access Points This guide covers the file, which is a

This section covers the two primary methods for upgrading a lightweight AP.