Accessing this menu requires inputting the factory default security passcode (typically 0001 or 1111 ). InPt : Selects the sensor input type (e.g., K , J , Pt , 4-20 ).
The measured Process Value exceeds the maximum physical capacity of the sensor or the software limit configured in Sc-H .
The 9240si operates as a single- or dual-loop digital controller. It integrates proportional-integral-derivative (PID) algorithms with robust input/output (I/O) options to maintain tight process thresholds. Key Specifications 9240si loop controller user manual
Safety Warning: Always disconnect primary power sources before handling or terminating electrical wires.
Threshold values for triggering auxiliary relays. Setup Level (Password Protected) Accessing this menu requires inputting the factory default
Increase this value to dampen rapid process spikes or sudden load changes; decrease it if the output becomes jittery and hyper-sensitive to signal noise. Advanced Features and Communication Protocols Digital Communication (Modbus RTU)
85–265V AC, 50/60 Hz, or 24V DC (model dependent). Power Consumption: Less than 8VA. The 9240si operates as a single- or dual-loop
Locate (Scale Low) and set it to match the transmitter’s minimum value (e.g., 0.0 PSI).